Shaanxi Peakrise Metal Co.,Ltd
Prestige First, Quality First and Service First
Add to Cart
W30% Tungsten Molybdenum Alloy Disc
1. Specification of Tungsten Molybdenum Alloy Disc:
An alloy made of tungsten and molybdenum is referred to as tungsten-molybdenum alloy. The tungsten content of commonly used tungsten-molybdenum alloys is 30% to 50% (mass). The procedure used to prepare tungsten-molybdenum alloys, which can be used to create rods, plates, wires, and other shapes, is the same as the one used to prepare metal molybdenum and metal molybdenum alloys.
W-Mo alloy disc for crucible
φ250mm*40mm
φ270mm*40mm
φ250mm*30mm
Or process as per customer drawing.
Grade: W30Mo70 alloy
2, Physical and chemical properties of Tungsten Molybdenum Alloy Disc:
| Quantitative analysis | ||||||||||
| Element | W | Mo | Fe | Si | Ca | Mg | P | C | O | Al |
| Concentration(%) | 30 | 70 | 0.001 | 0.002 | 0.0006 | 0.0006 | 0.002 | 0.003 | 0.003 | 0.004 |
3. Application of Tungsten Molybdenum Alloy Disc:
main used for the disc of tungsten crucible of sapphire crystal growth furnace field
Molybdenum and metal alloys have additional use in the production of weaponry and cutting-edge technologies like missiles and rockets. Additionally, filament, the heating element of high temperature electric furnaces, is made from tungsten wire. The electronics industry makes extensive use of molybdenum metal, which is easily processed into wire, strip, sheet, rod, and other shapes. In order to support the heating wire in light bulbs, the grid of electron tubes, etc., molybdenum wire is employed as a tiny hook. Molybdenum and tungsten boats (for vacuum coating).
Do you want to know more about our products?